| Recorded | |||||
|---|---|---|---|---|---|
| 09/26/2023 | |||||
| 10/04/2023 |
| If you're not familiar with how to configure a Dynamic Hosting Provider, then you should read through the guidelines in the IP Chkconfig utility. If you have an IP-based service name, then you should refer to that to find the appropriate Startup Programs section. For example, if you're using cPanel, then you will see a section for optional startup programs. The Startup Program for cPanel is cPanel_IP dhcpdiscovery. If you have an IP-based service name, then you can set up the appropriate startup program by following the instructions in the IP-based-service name chapter. When you're done with the optional startup programs, then you need to check the values and start the cPanel service. Just click on the "Start" button and then enter a password. Then, you should look for the "Control Panel Tuner" and then click on it. In this section, you should change the value of the Time Synchronization Type from "Managed Time" to "IP-based time." You also have to set the value of the DNS Name in the Name Synchronization field. If you're not familiar with how to configure a Dynamic Hosting Provider, then you should read through the guidelines in the IP Chkconfig utility. If you have an IP-based service name, then you should set the host name in the Host Name field. If you don't have an IP-based service name, then you have to set a default name. The value of the Name Synchronization Type in the Control Panel Section for "Dns Servers" should be "FTP". Now, you have to restart the cPanel service so that you can access the website that you want. To do this, you should click on the "Start" button. Furthermore, if you want to verify the existence of a particular IP address in the " DNS Servers " section, then you should use the standard query type. The " Server Name " field has to be filled out with the IP address. In this case, the " Server Protocol " field has to be filled out as well. You can just leave the " IP " blank. If everything goes well, then you should be able to view the result. The IP address verification is one of the most important processes in domain name managing. As you may know, domain name management involves a lot of functions such as domain parking, DNS, email forwarding, DNS locking and so on. To simplify things, the domain name servers are used to keep an eye on all the DNS queries made by the users. The DNS server keeps a record of every IP address that has been registered in the country. And it checks whether the domain name should be displayed or not. Basically there are two types of domain name server systems available: eInf HRRung and eNom. The eInf HRRung domain is responsible for holding all the records about domain names and they are updated manually from time to time. On the other hand eNom is also capable of doing some functions automatically, but they are not updated manually. eInf HRRung Domain is used for holding DNS addresses and also for checking DNS latency, but they are not used as frequently as eNom. So eInf HRRung Domain is less reliable than eNom. There are various benefits of using eInk. First of all, the eInk provides advanced facilities like auto discovery, caching, ressource eines and SOA. It can be configured with advanced features like session 2 cache, Kerb queues, queuing of multiple subflows, multiple forwarding options, etc. The eInk can be setup to support dynamic routing by use of BGP or Border Gateway Protocol (BGP), OSP, MPLS or LPD using STUN or LPD-MS. If you are using eInk for BGP, then it is important to configure route-maps or overlay routing through STUN or LPD. This feature can help you to get rid of routing tables and generate BGP policy to match the incoming packets. Apart from this, the eInk also provides support to IPR and STD services i.e. FTP, SFTP, IMAP and SMTP. You need to load the module 'inetop' and set the startup parameters as required to start your email service or FTP. Then go for adding IP directories and configure necessary firewall and security features as required. |